|
Product Details:
|
| Size: | 1/2″ (15 NB) To 48″ (1200NB) DN10~DN5000 | Standards: | AWWA C207 Class B ,Class D ,Rings And Blind |
|---|---|---|---|
| Coating: | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold And Hot Dip Galvanized | Connect Type/ Flange Face Type: | Raised Face (RF), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
| Carbon Steel: | ASTM A105 | Stainless Steel: | ASTM A182 F304 ASTM A182 F304L ASTM A182 F316 ASTM A182 F316L |
| Packing: | Plywood/Wood Pallet Or Case | ||
| High Light: | AWWA C207 Class B 304 316,Black Yellow Oil Flange AWWA C207,Black Yellow Oil Flange AWWA |
||
The AWWA stands for the American Water Works Association is a technical, non-profit committee, that identifies and unifies major requirements for waterworks systems. Prominent users of the AWWA C207 Flanges Dimensions include Waterworks, Wastewater, slurry as well as plant piping. Since these flanges are used in low pressure piping systems, the awwa c207 class f flanges is a standard that proves to be an effective cost saving solution, as compared to either ANSI or ASME forged flanges. These awwa c207 flange dimensions have been designed for use in industries such as oil, steam, or chemical applications.
AWWA C207 Flanges
AWWA standards provide awwa c207 steel pipe flanges properties that are intended to be used for potable water only. For example, the ratings of AWWA flange is applicable only at atmospheric temperature. The AWWA standards cover flange classes that are lettered as B, D, E, F. Out of all these classes, the commonly used connection is class D. In contrast to ANSI, the nominal pipe sizes for awwa c207 class d blind flange ranges between 3 inches to about 144 inches. Unlike the ANSI standard that includes all types of flanges, the AWWA standard only encompasses the following types of flanges i.e. – ring flange, hub type flange, blind flange, and threaded iron flanges.
| Nom Size | Thickness | Drilling | Weight | ||||||
| OD | Slip-On | Blind | Bore | Bolt Circle | Hole Dia | No. Holes | Slip-on | Blind | |
| A | T | T | B | C | |||||
| 4 | 10.00 | 1.130 | 1.130 | 4.57 | 7.88 | 0.875 | 8 | 18 | 25 |
| 5 | 11.00 | 1.210 | 1.210 | 5.66 | 9.25 | 0.875 | 8 | 22 | 33 |
| 6 | 12.50 | 1.310 | 1.310 | 6.73 | 10.62 | 0.875 | 12 | 30 | 46 |
| 8 | 15.00 | 1.310 | 1.310 | 8.73 | 13.00 | 1.000 | 12 | 40 | 66 |
| 10 | 17.50 | 1.500 | 1.500 | 10.88 | 15.25 | 1.125 | 16 | 56 | 102 |
| 12 | 20.50 | 1.630 | 1.630 | 12.88 | 17.75 | 1.250 | 16 | 83 | 152 |
| 14 | 23.00 | 1.940 | 1.940 | 14.19 | 20.25 | 1.250 | 20 | 128 | 228 |
| 16 | 25.50 | 2.140 | 2.140 | 16.19 | 22.50 | 1.375 | 20 | 167 | 310 |
| 18 | 28.00 | 2.250 | 2.250 | 18.19 | 24.75 | 1.375 | 24 | 204 | 392 |
| 20 | 30.50 | 2.330 | 2.330 | 20.19 | 27.00 | 1.375 | 24 | 247 | 482 |
| 22 | 33.00 | 2.500 | 2.500 | 22.19 | 29.25 | 1.375 | 24 | 307 | 606 |
| 24 | 36.00 | 2.690 | 2.690 | 24.19 | 32.00 | 1.625 | 24 | 388 | 776 |
| 26 | 38.25 | 3.000 | 3.000 | 26.19 | 34.50 | 1.875 | 28 | 451 | 977 |
| 28 | 40.75 | 3.130 | 3.130 | 28.19 | 37.00 | 1.875 | 28 | 532 | 1156 |
| 30 | 43.00 | 3.150 | 3.166 | 30.19 | 39.25 | 1.875 | 28 | 586 | 1303 |
| 32 | 45.25 | 3.250 | 3.332 | 32.19 | 41.50 | 1.875 | 28 | 657 | 1518 |
| 34 | 47.50 | 3.380 | 3.475 | 34.19 | 43.50 | 1.875 | 28 | 741 | 1745 |
| 36 | 50.00 | 3.460 | 3.671 | 36.19 | 46.00 | 2.125 | 32 | 802 | 2042 |
| 38 | 52.25 | 3.500 | 3.815 | 38.19 | 48.00 | 2.125 | 32 | 874 | 2317 |
| 40 | 54.25 | 3.630 | 3.982 | 40.19 | 50.25 | 2.125 | 36 | 937 | 2608 |
| 42 | 57.00 | 3.810 | 4.171 | 42.19 | 52.75 | 2.125 | 36 | 1103 | 3015 |
| 44 | 59.25 | 4.000 | 4.338 | 44.19 | 55.00 | 2.125 | 36 | 1237 | 3388 |
| 46 | 61.50 | 4.130 | 4.505 | 46.19 | 57.25 | 2.125 | 40 | 1344 | 3791 |
| 48 | 65.00 | 4.500 | 4.781 | 48.19 | 60.75 | 2.125 | 40 | 1718 | 4494 |
1. who are we?
We are based in Hebei, China, start from 1986,sell flange and pipe fitting to Mid East(15.00%),South America(20.00%), Europe(30.00%),Africa(10.00%), North America(5.00%),Southeast Asia(20.00%)
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Manhole Covers,Malleable Iron Pipe Fittings,Flange,Carbon Steel Pipe Fittings
4. why should you buy from us not from other suppliers?
1. auto-production line cast productio 2 Manual work add 3 drawing design 4. 10 Managers 5 Engineer and 50 workers 5. production capability: 50 tons per ton 6. factory MTC 7. service after-sale
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU,Express Delivery,DAF；
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Arabic,French
Contact Person: Miss. Mandy Liu
Tel: 0086 18903173335
Fax: 86-0317-6853077-6723871
